In this article, we’ll go over the first-time charging instructions for a new iPad as well as battery maintenance advice.
Now that you own a new iPad, you’re curious how long it will take to charge so you can use it. Thankfully, most recent iPads charge quickly.
How much time does your new iPad need to charge before you can use it without risk?
Table of Contents
How to Charge a New IPad the First Time
New iPad owners frequently wonder how long it should take to charge their expensive devices for the first time. It is generally recommended that the battery of a new mobile phone be charged for an amount of time sufficient to fully activate the lithium cell, as this will likely result in the phone working more durably in the future.
The situation with a new iPad, which has a 25Whr rechargeable lithium battery installed, is actually the same. The first time this battery is used, it must be charged for eight hours straight; after that, it can be fully activated three times in a row. Issues deserving special attention during the first charge for a longer service life of the battery are listed as follows:
- Before the iPad leaves the factory, the battery has already received an activation treatment. The battery has some electricity left in it because of the very early charging. Despite charging their own new iPads strictly in accordance with the adjustment time, some users claim that the device’s standby time is still insufficient for later use. Actually, the adjustment time should be increased and the battery fully discharged three to five times if the battery is truly authentic.
- The quantity of recharging and discharging a battery undergoes has a significant impact on its lifespan. In this regard, overcharging is bad for the battery, so it’s important to avoid overcharging. Furthermore, it is best for the battery to be fully discharged before being used again if the phone or iPad has been idle for more than seven days.
- It is not advised to expose the battery to extremely high or low temperatures, so users would be wise to avoid placing it in direct sunlight or an air-conditioned space. Despite the fact that the system will typically produce some heat while the battery is being charged, users are still advised against exposing the battery to extremes of heat or cold. Instead, they should charge the battery at room temperature without any covering.
- Please remove the battery as soon as it is fully charged to prevent damaging effects of overcharging on the battery’s performance.
- Users are advised to use the original charger or one from a reputable and trustworthy third party. In order to avoid damaging the battery or even posing unpredictable risks, the lithium battery must be charged using the lithium battery charger and according to the instructions.
- To ensure that the lithium battery can reach its saturation state, choose a charger that is compatible with the battery. If your iPad is going to be set aside and not used for a while, it should be separated from the charger after charging and not left plugged in for longer than 12 hours.
Following the recommended charging methods and using a high-quality charger are both necessary if you want your iPad to last longer.
How Long Do I Need to Charge My New IPad?
10 minutes of charging is required before a new iPad is usable, but only if it’s kept charging while used. The battery could sustain long-term damage if you unplug it and let it operate at a reduced capacity. Keep it plugged in until it has finished charging, which the first time may take 5-7 hours.
Now that you know the time frame you’re looking at to charge your iPad, let’s look at the best way to charge it, why you should never let it die, and how to maximize the life of your iPad’s battery.
Tips for Longer Service Life of the Battery
Don’t worry about “overcharging” your new iPad.
Your iPad’s battery has a limited capacity that you cannot go over.
Don’t buy into the myth that “overcharging” your iPad will decrease the lifetime of the battery.
Even if it were a genuine issue, your device’s software is already set up to prevent it from becoming one.
Regular charging is the best method for maintaining your iPad, and there is a setting to make that easier.
iOS 13 and later have an option called “Optimized Charging,” which schedules the time your iPad can charge based on when you want to use it.
Charges your iPad to 80% of capacity using optimized charging.
It then keeps it there for a short while before anticipating your need for it, giving it just enough time to charge to 100% before you unplug it.
Pretty cool, right?
Because the iPad needs to keep track of when you typically use it before it can determine when it needs to be fully charged, this does take some time to take effect—at least two to three weeks.
Enable the setting and establish a routine of plugging it in every night.
It’s possible that your iPad will charge slower as time goes on or if you try using a different charging port than the one that came with it.
This might be the case because some devices are picky about the wall chargers you use for them and because the strengths of various chargers vary.
Every device requires a specific level of charger power, and chargers degrade over time.
Use a 10W wall charger, such as the one that was included with your device, as it will work the best.
If your current iPad charger malfunctions, you can buy a replacement at Apple or another retailer.
Don’t Let It Die!
iPads use lithium batteries, which are different from nickel-based batteries (which the battery myths are based on).
You can use and charge your iPad before it reaches 100% of its charge.
In fact, you should always make sure to charge it before it approaches zero.
20% is the lowest you should let it get down to if you have the option to charge it.
By preventing it from dying, you can ensure that you have it when you require it. Also read: Why is My IPad Dying So Fast
When you are working on something crucial, like writing an email or even finishing the current level of your favorite game, you don’t want it to crash.
Your iPad will suffer permanent damage if the battery ever runs out completely.
Even if you recharge it, the battery will still remember that it died and perform less well.
Charge it right away if it does ever reach 0% before shutting down.
Similar to a fuel gauge, 0% does not necessarily indicate total depletion.
Even if it is turned off, the power will still be drained even though there is still enough power to prevent the battery from immediately dying.
Keep It Healthy
Here are some things you can do to take good care of your iPad’s battery and keep it running for many years if you want it to last.
Keep the temperature ranges below it.
Conditions above 95° Fahrenheit can damage the capacity of your iPad’s battery permanently.
This covers keeping your iPad in warm environments and using cases that could heat up and warm the battery.
Contrarily, while low temperatures (below 32°F) can drain the battery, this effect is only transient and will disappear once your device warms back up.
Make sure your iPad’s battery is about 50% charged if you need to store it for longer than a day or so.
A device’s battery slowly discharges whenever you store it and don’t charge it.
The iPad’s battery will quickly discharge if you store it at 100%.
On the other hand, if you keep it close to zero, it will also drain before dying entirely.
The best way to guarantee that it will still have some battery life when you return to it is to store it with 50% battery life.
Use Wi-Fi instead of data as another way to take good care of your battery.
Using Wi-Fi as your primary method of internet access is a great way to preserve your battery since it consumes less power than cellular data.
When the battery is nearing its end and there isn’t a charger nearby, Low Power Mode (available in iOS 9 and later) is an additional way to save power.
Your iPad will prompt you to activate Low Power Mode when the battery level reaches 20%.
It will repeat the prompt at 10% if you don’t take that into consideration.
The iPad’s performance is enhanced by Low Power Mode to ensure that only vital functions are powered.
To extend the charge, you can also lower the brightness.
The iPad screen’s internal light sensor is used by the automatic brightness settings to gauge how bright the display should be.
Reduce the brightness on your iPad’s screen if you want to prolong its battery life, especially if you won’t be using it for a while.
iPads charge relatively quickly, but if you want the battery to last, don’t let it get below 20%.
Conclusion: Charge a New IPad the First Time
In other words, it’s advised to charge the new iPads until the battery is fully charged. To prevent overheating, you should plug it in when it’s at room temperature. If it hasn’t been used for a while, be mindful of deeply discharging it before recharging. Using certified chargers when charging your iPad is also crucial. Forming these positive charging habits is your first step if you want a long-lasting iPad battery because that is what all the advice is about!
Should You Charge a New IPad before Using It?
It really does not matter. When you take it out of the box and set it up, you can immediately use it. It should be between 70 and 80% charged. You can also charge it by plugging it in.
How Long Should I Charge My IPad before First Use?
10 minutes of charging is required before a new iPad is usable, but only if it’s kept charging while used. The battery could sustain long-term damage if you unplug it and let it operate at a reduced capacity. Keep it plugged in until it is fully charged, which could take the first time between 5-7 hours.
Can You Charge New IPad With Old Charger?
Are old cables and chargers still functional? You can still use some old chargers for your iPad. You don’t need an Apple iPad charger; any charger will do. The cable’s ability to connect to your iPad using the same connector is what matters most.